ACCESSORIES
49
2015 STREET CATALOG
luggage
body
accessories
handlebars
& grips
mirrors
cables &
levers
electrical
lighting
engine
fuel &
intake
air & oil
filters
clutch
brakes
drive
steering &
suspension
bearings
tires
chemicals
tools &
shop
trailer
exhaust
You know your garage door remote. Maybe it’s clipped to your visor, or in your
purse or your jacket pocket, or under the seat, or in the glove compartment, or
stashed away in the console. Maybe it just drove away in the other car.
You know what the battery looks like, too, you replace it every year or so. It’s a
nine-volt, or is it two AA’s? You better check before you buy new ones…
You might even worry about somebody swiping it and using it to get into your
house.
We’ve solved these problems by electronically integrating the activation of your
garage door opener remote into the high beam switch of your turn signal lever.
A double flash of your headlight high beams opens or closes your garage
door
A small one time investment gets you the maintenance free system
No remote transmitter to get stolen or lost
No battery to buy or replace…Flash2Pass™ gets its power from your car
Digital encrypted signal and rolling code technology for ultimate security
Quick and easy do-it-yourself installation
Up to six transmitters may operate a single receiver
Additional receivers may be installed elsewhere and programmed to your Flash2Pass™ equipped
vehicle
Works with virtually any garage door opener manufactured since 1982
The Transmitter is a radio frequency device that is mounted under the hood of the car. It is relatively
small, approximately 2” x 2” x ¾” and is attached under the hood with either the enclosed screws,
or the plastic zip tie. The wires are attached with Posi-Tap™ connectors to the headlight high beam
positive wire and to the ground wire.The Flash2Pass™ transmitter is non-polarized so you can attach
either wire to the headlight wires.
The Flash2Pass™ receiver is designed to replace the push button inside your garage. If you have
additional functions on your push button that you would like to keep, the receiver can be installed next
to your original push button and “piggybacked” to it.
The Flash2Pass™ transmitter and receiver are packaged as a set that is pre-programmed at the factory, or they are available individually. For
instance, if you had a two-car garage with one large door for both bays, you would buy one set and an additional transmitter. The additional
transmitter would be installed in the second vehicle and the receiver programmed to accept it.
Say you had a vacation home with a garage door opener. You could get an additional Flash2Pass™ receiver for it and then program your car
to it. That way, you wouldn’t have to remember to bring the remote with you. It will always be at your fingertips…both at home and on vacation.
Now, if you live in a gated community and the community installed the F2P Integrated
Control Access System, you would be able to access the community gate, and your
individual garage. We call this the “gate to garage” concept. Also if you worked in a
place that had some sort of parking control and the F2P ICAS were in place, you
again could use your Flash2Pass™ transmitter to gain access, assuming you were
authorized and/or programmed into the receiver.
FLASH2PASS
TM
A GARAGE DOOR OPENER MADE
FOR YOUR MOTORCYCLE,
ATV OR UTV!
Coming Home Just
Got a Whole Lot
Easier
904000 99.95
G
Complete Unit
904001 39.95
G
Transmitter Only
904002 69.95
G
Receiver Only
904003 9.95
G
A/C Adapter
