CABLES & LEVERS
264
luggage
body
accessories
handlebars
& grips
mirrors
cables &
levers
electrical
lighting
engine
fuel &
intake
air & oil
filters
clutch
brakes
drive
steering &
suspension
bearings
tires
chemicals
tools &
shop
trailer
exhaust
REVOLVER THROTTLE KITS continued
MODEL
NAME
CC TYPE CARB/TB FN YEAR
PART #
SUZUKI
CONTINUED
GSX 1300R
Hayabusa
1300 Sportbike Stock 091 11-12
144112 154.99
G
SV 650S
0650 Street
Stock
03-09
140149 154.99
H
SV 1000S
1000 Street
Stock
03-07
140149 154.99
H
TRIUMPH
Daytona 675R
Daytona 675R
0675 Sportbike Stock 108 13
144256 154.99
G
YAMAHA
YZF R1
R1
1000 Sportbike Stock 108 02-03
140155 154.99
H
YZF R1
R1
1000 Sportbike Stock 108 04-06
140154 154.99
H
YZF R1
R1
1000 Sportbike Stock 108 07-08
140164 154.99
H
YZF R1
R1
1000 Sportbike Stock 108 09-14
140175 154.99
H
YZF R6
R6
0600 Sportbike Stock 079 03-05
140157 154.99
H
YZF R6
R6
0600 Sportbike Stock 108 06-07
140156 154.99
H
YZF R6
R6
0600 Sportbike Stock 108 08-14
140169 154.99
H
YZF R6S
R6S
0600 Sportbike Stock 079 06-09
140157 154.99
H
FOOT NOTES (FN)
079
For use with stock throttle bodies/carburetors and Revolver throttle assembly only. IMPORTANT - The Revolver VR throttle does not have the
starter and kill switch wiring or switches that are built into your stock throttle assembly. Use of the Revolver VR Throttle requires an aftermarket
kill switch and starter button assembly (pn 11-0098) not included in kit. Revolver Kits have cables specifically designed for fitment on specific
models, but the Revolver throttle itself is not model specific. Therefore, in some situations, the Revolver kit may not be a direct bolt on installa-
tion due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock
handlebar, shorten the Revolver throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user
to determine the best method for fitment on their motorcycle, and ensure that the Revolver kit is installed properly and with the correct clear-
ances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper
installation could result in great bodily injury or death.
091
For use with stock throttle bodies. Stock reel is 33.4 mm. IMPORTANT - The stock twist throttle assembly on this model incorporates an on/off
switch, mode switch, and starter button. The Motion Pro 11-0098 accessory switch only has an on/off switch and starter button, and cannot be
used to replace the original switching functions on the stock throttle assembly. In order to install the Revolver VR kit and retain all the neces-
sary switching functions, owners of this model will need to install longer aftermarket handlebars (at least 50 mm longer than stock on the right
side) and use the stock throttle assembly mounted behind the Revolver VR throttle housing. The stock twist throttle assembly can be modified
to remove the throttle reel holder portion and leave just the necessary switches. This modification makes it narrower and uses less space
on the handlebar. Revolver Kits have cables specifically designed for fitment on specific models, but the Revolver throttle itself is not model
specific. Therefore, in some situations, the Revolver kit may not be a direct bolt on installation due to space limitations on the stock handlebar.
In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Revolver throttle tube and
grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their
motorcycle, and ensure that the Revolver kit is installed properly and with the correct clearances for safe operation. Installation should be done
by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
105
01-2679 Revolver throttle kit features throttle cable set 01-1181 that is 3 inches longer than throttle cable 01-1106 included in Revolver throttle
kit 01-2619
106
For use with stock throttle bodies. Revolver throttle kit for BMW S1000RR
Vehicle production date range 09/08 - 03/12. Revolver Kits have cables specifically designed for fitment on specific models, but the Revolver
throttle itself is not model specific. Therefore, in some situations, the Revolver kit may not be a direct bolt on installation due to space limita-
tions on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the
Revolver throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best
method for fitment on their motorcycle, and ensure that the Revolver kit is installed properly and with the correct clearances for safe operation.
Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in
great bodily injury or death.
108
Revolver Kits have cables specifically designed for fitment on specific models, but the Revolver throttle itself is not model specific. Therefore,
in some situations, the Revolver kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installa-
tions, it may be necessary to move other control components on the stock handlebar, shorten the Revolver throttle tube and grip, install longer
after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and
ensure that the Revolver kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified
mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
132
01-2714 Revolver throttle kit features throttle cable set 01-1208 that is 3 inches longer than throttle cable 01-1205 included in Revolver throttle
kit 01-2711.
