492
helmets &
eyewear
apparel &
gloves
luggage
boots
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
front
suspension
traction
mini sleds
chemicals
offroad
tools &
shop
trailer &
towing
CONTROLS
NON-PIVOT RISER BLOCK
Non Pivot Risers install between your handlebar clamps and your flat top steering post. They are the easiest,
least expensive way to raise your bars, but while they will raise your bars, they will also push them back a
little depending on the angle of your steering post. Made from extruded 6061-T6 aluminum each block comes
complete with the necessary longer mounting bolts. Most snowmobiles will accept up to a 3” Riser Block
without any cable modifications. If you need to lengthen your throttle cable or brake line you can use our
Throttle Cable Extension Kit or Extended Length Brake Lines
Introducing the new PowerRiser from
PowerMadd. This one piece design offers
superior strength at an unequaled price.
The PowerRiser provides dual pivot
points so you can position the riser
front to back, while positioning your
bars up and down for the perfect bar
placement.The PowerRiser comes in
two widths – 3.25” for snowmobiles
as well as Can Am and Polaris
ATVs, and 4.75” for ATVs and
motorcycles. Both widths allow
you to use standard 7/8” bars or
oversize 1 1/8” bars.
The PowerRiser 325 comes in a 2” rise and will work on most
snowmobiles with no cable modification. Check your cable slack
for use on ATVs.
Note - One piece OE bar clamps will not work with the PowerRiser
325 - Replacement 7/8” bar clamps are required (PM15470)
POWERRISER 325
POWERRISER 475
The PowerRiser 475 comes in two heights – 2” and 3”. Both are
available for standard 7/8” bars and oversize 1 1/8” bars.
2” Tall X 3.25” wide, 7/8” to 7/8” Bar
PM15420 64.95
J
2” Tall X 3.25” wide, 7/8” to 1 1/8” Bar
PM15421
64.95
G
2” Tall X 4.75” wide, 7/8” to 7/8” Bar
PM15430 65.00
G
2” Tall X 4.75” wide, 7/8” to 1 1/8” Bar
PM15431 65.00
G
3” Tall X 4.75” wide, 7/8” to 7/8” Bar
PM15432 70.00
G
3” Tall X 4.75” wide, 7/8” to 1 1/8” Bar
PM15433 70.00
G
2.25” Tall X 4.75” wide, 1 1/8” to 1 1/8” Bar
PM15440 75.00
G
This innovative riser system works on all brands of snowmobiles
with a flat steering post! The Universal Pivoting Riser raises your
bars 3” and can be used without additional riser blocks. Dual pivot
points allow for bars to be positioned front to back and rotated
up or down. Use additional riser blocks to increase bar height
an additional 1”, 2” or 3”.
Universal 3” Pivoting Riser
PD15400
70.00
G
Universal Extension Block - 1”
PD5401
20.00
G
Universal Extension Block - 2”
PD5402
27.00
L
Universal Extension Block - 3”
PD15403
30.00
G
UNIVERSAL PIVOTING
RISER SYSTEM
* Fits Arctic Cat snowmobiles & ATVs with 1/4” bolt ** Fits Arctic Cat snowmobiles & ATVs with 5/16” bolts *** Will not fit Yamaha Apex or Nytro
ARCTIC CAT
ARCTIC CAT
UP TO ‘99*
‘00 & UP**
POLARIS
SKI-DOO
YAMAHA***
2”
PD5503 30.00
G
PD5510 30.00
G
PD5503 30.00
G
PD5504 30.00
G
PD5505 30.00
G
3”
PD5506 35.00
G
PD5511 35.00
G
PD5506 35.00
G
PD5507 35.00
G
PD5508 35.00
G
4”
PD5517 40.00
G
-----
PD5517 40.00
G
PD5518 40.00
G
PD5519 40.00
G
5”
-----
PD5524 40.00
G
-----
-----
-----
