ATV/UTV 2018

STEERING & SUSPENSION 1011 carriers & racks bumpers & winches accessories plows & implements frame & chassis utv accessories body handlebar & grips cables & levers fuel & intake engine clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust electrical & ignition dealer aids 2018 ATV / UTV CATALOG HIGH LIFTER ATV LIFT KITS continued NOTES: 30 SIGNATURE SERIES LIFT KIT Estimated install time for experienced mechanic: 1.5 hr NOTE: 1” SPACERS ARE REQUIRED IN THE REAR IF YOU RUN FACTORY WHEELS WITH A LIFT KIT INSTALLED ON THE K650i/K750i BRUTE FORCE!!!!!!!!! 31 Estimated install time for experienced mechanic: 3hr 32 LIFT KIT KAW 800 TERYX SIGNATURE SERIES LIFT KIT Lift: 2.5” Estimated install time for experienced mechanic: 3hr Largest tire with lift kit is 28” (29.5” will rub a little) 33 FRONT AND REAR LIFT KIT (NO SPRINGS ARE INCLUDED IN THIS KIT!!!!!) NOTE: Requires grinding on the front control arm for axle boot clearance. 34 SIGNATURE SERIES LIFT KIT Lift: 2” Largest Tire Fit: 28” Outlaw Estimated install time for experienced mechanic: 2hr 35 Polaris Ranger NORTHSTAR 1000 - 2” Lift Kit 36 Polaris Ranger NORTHSTAR 1000 - 4” Lift Kit 37 Lift Kit Gain: 4” Largest Tire: 32” (According to Dan 33” will work) Largest Tire with Control Arm Kit: 34.5” Estimated install time for an experienced mechanic: 4 hrs POLARIS GENERAL 1000 DELUXE & GENERAL 4 MODELS NOTE: Do not use the rear spring spacer for the General Deluxe and General 4 Models. Just adjust the preload on rear shocks 1/2” to achieve proper balance height.NOTES: Works with High Lifter front forward kit and rear raked kit w/ OEM axles. Laser cut bracket lift front and rear plus CNC aluminum spring spacers in the rear. Laser cut front and rear lift brackets are powder coated black. 38 LIFT KIT POL 1000 RZR XP NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (HAMMER- TONE BLACK) SEE ALL NOTES BEFORE SELLING!!! Estimated install time for experienced mechanic: 3hr NOTE: THIS LIFT IS A 3” LIFT WITH STANDARD OEM SHOCK PRELOAD SETTINGS AND 5” OF LIFT CAN BE ACHIEVED BY ADJUSTING/INCREASING THE OEM SHOCK PRELOAD SETTINGS. IMPORTANT NOTE: WHEN SELLING THIS KIT TO A CUSTOMER WITH ANY RZR1000 MODEL WITH HLP OR POLARIS (STRAIGHT) 1 1/4” DIAMETER HEAVY DUTY REAR UPPER RADIUS BARS BE SURE TO ASK THEM IF THEY ALSO HAVE THE POLARIS OEM REAR BUMPER INSTALLED ON THEIR RZR 1000 BEFORE SELLING THIS KIT!!! IF THEY HAVE THE POLARIS OEM REAR BUMPER THERE WILL BE CLEARANCE/ FITMENT ISSUES AND THE HLP OR POLARIS HEAVY DUTY 1 1/4” REAR UPPER RADIUS BARS WILL HIT THE OPTIONAL OEM POLARIS REAR BUMPER IF YOU ADD THIS LIFT KIT!!! NOTE: THE 2 OPTIONS TO CORRECT THE FITMENT ISSUE ABOVE ARE: (1) UPGRADE TO OUR NEW STYLE HIGH LIFTER ARCHED UPPER RADIUS BARS. (2) REMOVE THE REAR OEM BUMPER. 39 LIFT KIT POL 1000 RZR XP NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (ORANGE) SEE ALL NOTES BEFORE SELLING!!! Estimated install time for experienced mechanic: 3hr NOTE: THIS LIFT IS A 3” LIFT WITH STANDARD OEM SHOCK PRELOAD SETTINGS AND 5” OF LIFT CAN BE ACHIEVED BY ADJUSTING/INCREASING THE OEM SHOCK PRELOAD SETTINGS. IMPORTANT NOTE: WHEN SELLING THIS KIT TO A CUSTOMER WITH ANY RZR1000 MODEL WITH HLP OR POLARIS (STRAIGHT) 1 1/4” DIAMETER HEAVY DUTY REAR UPPER RADIUS BARS BE SURE TO ASK THEM IF THEY ALSO HAVE THE POLARIS OEM REAR BUMPER INSTALLED ON THEIR RZR 1000 BEFORE SELLING THIS KIT!!! IF THEY HAVE THE POLARIS OEM REAR BUMPER THERE WILL BE CLEARANCE/ FITMENT ISSUES AND THE HLP OR POLARIS HEAVY DUTY 1 1/4” REAR UPPER RADIUS BARS WILL HIT THE OPTIONAL OEM POLARIS REAR BUMPER IF YOU ADD THIS LIFT KIT!!! NOTE: THE 2 OPTIONS TO CORRECT THE FITMENT ISSUE ABOVE ARE: (1) UPGRADE TO OUR NEW STYLE HIGH LIFTER ARCHED UPPER RADIUS BARS. (2) REMOVE THE REAR OEM BUMPER. 40 LIFT KIT POL 1000 RZR XP NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (RED) SEE ALL NOTES BEFORE SELLING!!! Estimated install time for experienced mechanic: 3hr NOTE: THIS LIFT IS A 3” LIFT WITH STANDARD OEM SHOCK PRELOAD SETTINGS AND 5” OF LIFT CAN BE ACHIEVED BY ADJUSTING/INCREASING THE OEM SHOCK PRELOAD SETTINGS. IMPORTANT NOTE: WHEN SELLING THIS KIT TO A CUSTOMER WITH ANY RZR1000 MODEL WITH HLP OR POLARIS (STRAIGHT) 1 1/4” DIAMETER HEAVY DUTY REAR UPPER RADIUS BARS BE SURE TO ASK THEM IF THEY ALSO HAVE THE POLARIS OEM REAR BUMPER INSTALLED ON THEIR RZR 1000 BEFORE SELLING THIS KIT!!! IF THEY HAVE THE POLARIS OEM REAR BUMPER THERE WILL BE CLEARANCE/ FITMENT ISSUES AND THE HLP OR POLARIS HEAVY DUTY 1 1/4” REAR UPPER RADIUS BARS WILL HIT THE OPTIONAL OEM POLARIS REAR BUMPER IF YOU ADD THIS LIFT KIT!!! NOTE: THE 2 OPTIONS TO CORRECT THE FITMENT ISSUE ABOVE ARE: (1) UPGRADE TO OUR NEW STYLE HIGH LIFTER ARCHED UPPER RADIUS BARS. (2) REMOVE THE REAR OEM BUMPER. 41 LIFT KIT POL 1000 RZR XP 2015-2017 NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (HAMMERTONE BLACK) SEE ALL NOTES BEFORE SELLING!!! NOTES: 42 LIFT KIT POL 1000 RZR XP 2015-2017 NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (ORANGE) SEE ALL NOTES BEFORE SELLING!!! 43 LIFT KIT POL 1000 RZR XP 2015-2017 NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (RED) SEE ALL NOTES BEFORE SELLING!!! 44 LIFT KIT POL 1000 RZR XP 2015-2017 NEW 3”- 5” SIGNATURE SERIES LIFT KIT- (SILVER) SEE ALL NOTES BEFORE SELLING!!! 45 LIFT KIT POL. RZR 1000 S (HAMMERTONE BLACK) SIGNATURE SERIES LIFT KIT Lift Kit Gain: 2” Tire Size: 30” with aftermarket wheels Install Time: 3hrs Black Powder Coated Finish 46 LIFT KIT POL 1000 RZR TURBO 3-5” (HAMMERTONE BLACK) SIGNATURE SERIES LIFT KIT- SEE ALL NOTES BEFORE SELLING!!! Estimated install time for experienced mechanic: 3hr NOTE: THIS LIFT IS A 3” LIFT WITH STANDARD OEM SHOCK PRELOAD SETTINGS AND 5” OF LIFT CAN BE ACHIEVED BY ADJUSTING/INCREASING THE OEM SHOCK PRELOAD 47 Lift Amount: 2” Install Time: 3 hours Largest Tire: 29.5” and 31” with trimming of fender NOTE: Rear factory upper A-Arm modification REQUIRED if running larger aftermar- ket axles NOTE: This lift kit DOES fit any Sportsman or Scrambler models with or without Fox, Walker Evans, or any brand of reservoir shocks. NOTE: DOES NOT WORK ON SPORTSMAN 1000 XP 2017. NEW KIT NEEDED!! NOTES: POL. 550/850/1000 SPT. XP, X2 with or without Fox Shocks POL. 850/1000 SCRAMBLER with or without Fox Shocks ------------------------------------------------------------------------------------------------------------ FITS: POL. 550/850/1000 SPORTSMAN XP and TOURING * Rear factory upper A-Arm modification REQUIRED if running larger aftermarket axles! Zinc Plated Finish 48 Lift Kit Gain: 2” Largest Tire: Largest tire with the lift kit is 31” without trimming the fenders Install Time: 2hrs NOTE:All components are precision CNC laser cut. NOTE: Stock axles work with the lift kit NOTE: For larger tires you will need to cut the fenders. NOTE: If they are running the factory wheels in the rear they will need a 1” spacer to clearance the factory snorkel. Zinc Plated Finish 49 Lift Kit Gain: 2” Largest Tire: Largest tire with the lift kit is 31” without trimming the fenders Install Time: 2hrs NOTE: Does not work on High Lifter Edition Sportsman 1000 50 1.Do you have an independent rear suspension? YES = PLK335/500, PLK500-03 or PLK500-04 NO = GOTO Q. #2 2. Do you have a single shock in the rear, and the eyelet is attached to the bottom of the shock? YES= PLK3/4/425 NO = GOTO Q. #3 3. Do you have a single shock in the rear, and the bottom of the shock is a prong like mount, and the eyelet is attached to the rear differential? YES = PLK425/500 NO = don’t have a lift kit for that ATV. 51 NOTE: THIS KIT “ONLY FITS” POLARIS “MIDSIZE” RANGERS WITH FRONT STRUTS! THIS KIT “DOES NOT” FIT FULL SIZE RANGERS WITH FRONT UPPER AND LOWER CONTROL ARMS WITH SHOCKS! NOTE: 1.5” SPACERS ARE REQUIRED IF CUSTOMER WANTS TO RUN FACTORY WHEELS WITH THIS LIFT KIT INSTALLED 52 FITMENT NOTE #1 : CUSTOMER IS REQUIRED TO UPGRADE THE FRONT FAC- TORY CV AXLES WITH HEAVY DUTY AFTERMARKET AXLES OR OUR AXLE BAR KIT PART # (ABK-P-4) TO INSTALL THIS KIT!!! FITMENT NOTE #2: 1.5” SPACERS ARE REQUIRED IF CUSTOMER WANTS TO RUN FACTORY WHEELS WITH THIS LIFT KIT INSTALLED NOTE: THIS KIT “ONLY FITS” POLARIS “MIDSIZE” RANGERS WITH FRONT STRUTS! THIS KIT “DOES NOT” FIT FULL SIZE RANGERS WITH FRONT UPPER AND LOWER CONTROL ARMS WITH SHOCKS! NOTE: 1.5” SPACERS ARE REQUIRED IF CUSTOMER WANTS TO RUN FACTORY WHEELS WITH THIS LIFT KIT INSTALLED 53 1.Do you have an independent rear suspension? YES = PLK335/500 NO = GOTO Q. #2 2. Do you have a single shock in the rear, and the eyelet is attached to the bottom of the shock? YES= PLK3/4/425 NO = GOTO Q. #3 3. Do you have a single shock in the rear, and the bottom of the shock is a prong like mount, and the eyelet is attached to the rear differential? YES = PLK425/500 NO = don’t have a lift kit for that ATV. 54 “FRONT ONLY” LIFT KIT- FOR (SEE APPLICATIONS BELOW) & ALL POLARIS ATV’s (1996-2011) WITH McPHERSON STRUTS Estimated install time for experienced mechanic: 2hr