ATV/UTV 2018

STEERING & SUSPENSION 1013 carriers & racks bumpers & winches accessories plows & implements frame & chassis utv accessories body handlebar & grips cables & levers fuel & intake engine clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust electrical & ignition dealer aids 2018 ATV / UTV CATALOG NOTES: 67 POLARIS RZR XP 900/900 4 LIFT KIT POL 900 RZR XP 2011-14 & RZR XP “4” 2013-14” NEW” 5” SIGNATURE SERIES “ADJUSTABLE” LIFT KIT (RED)- SEE ALL NOTES BEFORE SELLING!!! Estimated install time for experienced mechanic: 2hr FITS: POLARIS 900 RZR XP 2011-2014 (SEE ALL NOTES!!!) POLARIS 900 RZR XP “4” 2012-2014 (SEE ALL NOTES!!!) NOTE: IF YOU WANT TO INSTALL THIS LIFT KIT ON ANY RZR 900 XP 4 (4 SEATER) OR WALKER EVANS EDITION RZR 900 XP (2 SEATER OR 4 SEATER) THAT ALSO HAS OUR BUMPER-RZR9 OR EMP RZR 900 WINCH BUMPER INSTALLED...YOU MUST BUY OUR “OPTIONAL” BUMPER MOUNTING BRACKET PART# (BUMPER- BRKT-1). SEE PART# BUMPER-BRKT-1 FOR ADDITIONAL NOTES. NOTE: THIS LIFT KIT FITS FINE IF THE CUSTOMER DOES NOT HAVE A FRONT WINCH BUMPER INSTALLED ON THEIR RZR900 XP (2SEATER OR 4 SEATER) THAT HAS WALKER EVANS SHOCKS. NOTE: THIS NEW KIT GIVES YOU THE OPTION OF RUNNING YOUR STANDARD RZR 900 XP 2 SEATER MODELS (NON WALKER EVANS EDITIONS) IN THE 5” LIFTED POSITION FOR OPTIMAL GROUND CLEARANCE OR YOU CAN CHANGE BACK TO THE STOCK HEIGHT LOCATION ON THE LIFT BRACKETS FOR HARDCORE TRAIL RIDING WITHOUT HAVING TO REMOVE YOUR LIFT KIT FROM YOUR 900 XP. PLEASE NOTE THIS KIT IS NOT ADJUSTABLE ON 2012-2014 XP “4” OR ANY 2 SEATER WALKER EVANS EDITON RZR900 XP DUE TO THE LARGER SHOCK BODY ON THE WALKER EVANS EDTIONS!!! SEE OUR INSTRUCTIONS FOR FULL DETAILS ON THE INSTALL AND 5” LIFT/ STOCK HEIGHT OPTIONS. NOTE: SOME GRINDING ON REAR TRAILING ARM IS REQURED FOR FACTORY CV BOOT CLEARANCE. THIS IS DETAILED AND SHOWN IN OUR INSTRUCTIONS. IF YOU ADD A HEAVY DUTY AFTERMARKET AXLE YOU WILL HAVE TO GRIND A LARGER PORTION DUE TO THE LARGER DIAMETER OUTER CUP/CV BOOT. NOTE: THIS KIT IS ONLY ADJUSTABLE ON THE 2011-2014 RZR 900 XP STANDARD CAB 2 SEAT MODEL. NOTE: THIS KIT IS NOT ADJUSTABLE ON THE 2012-2014 RZR 900 XP “4” 4 SEAT MODEL OR ANY 2 SEATER WALKER EVANS EDITON RZR 900 XP DUE TO THE LARGER SHOCK BODY ON THE WALKER EVANS EDTIONS!!! NOTE: OUR NEW PLK900RZR-51 “ADJUSTABLE” KIT DOES ALLOWYOU TO INSTALL THE HIGH LIFTER OR EMP RZR 900 XP FRONT WINCH BUMPER WITHOUT CLEARANCE ISSUES ON THE BUMPER BRACKETS ON THE STANDARD RZR900 XP 2 SEATER MODELS (NON WALKER EVANS EDITONS).YOU MUST ROTATE THE SHOCK RESERVOIR 180 DEGREES FOR PROPER INSTALLATION AND CLEAR- ANCES ON ALL OF THE STANDARD RZR 900 XP 2 SEATER MODELS. SEE OUR LIFT KIT INSTRUCTIONS FOR DETAILS ON ROTATING SHOCK RESERVOIR. NOTE:YOU CANNOT INSTALL BUMPER-RZR9 ON ANY WALKER EVANS EDITION MODELS (2 OR 4 SEATERS) WITH THIS LIFT KIT INSTALLED...UNLESS YOU PUR- CHASE OUR OPTIONAL BUMPER BRACKET...SEE PART# (BUMPER-BRKT-1) NOTE: WE RECOMMEND A SET OF OUR MAX CLEARANCE RADIUS BARS...THEY OFFER MAJOR UPGRADES IN QUALITY AND A SIGNIFICANT GAIN IN GROUND CLEARANCE...THEY ARE A MUST FOR EVERY 900 XP. SEE PART# PSRA-RZR9 (ALSO SEE OUR MATCHING TOP HD RADIUS BARS...PART# PSRA-RZR9-1) NOTE: THE NEW 2011-2014 POL. 900 RZR XP IS A VERY POWERFUL MACHINE AND IS SUBJECT TO BREAK AXLES (FRONT AND REAR) WITH OR WITHOUT A LIFT KIT AND BIG AGGRESSIVE TIRES. FRONT AND REAR AXLES ARE SUBJECT TO BREAK WITH OR WITHOUT A LIFT KIT, BUT THE REAR AXLES ARE ESPE- CIALLY SUBJECT TO BREAKAGE WHEN ACCELERATING HARD IN REVERSE WHILE YOU ARE STUCK, IN A BIND....ETC. AND THE SUSPENSION IS AT FULL OR CLOSE TO FULL EXTENSION. 68 2”- 5” SIGNATURE SERIES LIFT KIT- (HAMMERTONE BLACK) DOES NOT WORK ON 2017 MODELS! The front has a sway bar strarting in 2017. Estimated install time for experienced mechanic: 2hr DOES NOT WORK ON POLARIS RZR 900S BASE 2016 MODEL! DOES NOT WORK ON POLARIS RZR 1000 S !!!!!! NOTE: CHECK FOR POTENTIAL CLEARANCE ISSUES BETWEEN THIS LIFT KIT AND ANY AFTERMARKET EXHAUST SYSTEM BEFORE PURCHAS- ING THIS LIFT TO MAKE SURE THERE ARE NO FITMENT ISSUES. NOTE: THIS LIFT IS A 2” LIFT WITH STANDARD OEM SHOCK PRELOAD SETTINGS AND 5” OF LIFT CAN BE ACHIEVED BY ADJUSTING/INCREASING THE OEM SHOCK PRELOAD SETTINGS. NOTE: DOES NOT FIT RZR 900 50” OR 55” MODELS!!! NOTES: 69 1” SIGNATURE SERIES LIFT KIT- (HAMMERTONE BLACK) Lift: 1” Front and Rear Largest Tire: 28” with rubbing Estimated install time for experienced mechanic: 2hr NOTE: THE LARGEST TIRE YOU CAN FIT ON THE 2015 900 RZR 50” WITH THIS LIFT KIT IS A 28” TIRE AND THERE IS STILL MINIMAL RUBBING WHEN JUMPING OR GOING INTO A HOLE WHILE TURNING SHARPLY. 70 Estimated install time for experienced mechanic: 1.5hr IF A CUSTOMER TRIES TO COMBINE OUR HLP FRONT SPRING KIT (SPRPF800) WITH THIS LIFT KIT THEY WILL GET SUBSTANTIALLY MORE LIFT IN THE FRONT WHICH WILL CAUSE THE FRONT TIRES TO CAMBER OUT SIGNIFICANTLY AT THE TOP FROM TOO MUCH LIFT AND THE FRONT AXLE ANGLES WILL ALSO BE INCREASED WHICH CAUSES ADDITONAL WEAR. NOTE: DOES NOT WORK ON 2017 ACE 570 SP OR 2017 ACE 900 XC. THESE UNITS DO NOT HAVE A STRUT FRONT. OUR KIT IS DESIGNED TO WORK WITH STRUTS! 71 2” LIFT Estimated install time for experienced mechanic: 2hr 72 FACTORY TIE ROD ENDS ARE TO BE RE-USED IF THEY ARE IN GOOD WORKING CONDITION!!!!!!!!! IF THEY ARE NOT IN GOOD WORKING CONDITION THEY WILL NEED TO BE REPLACED!!!!!! 73 The SUZUKI 450i, 700i & 750i KING QUAD require a 1” or greater wheel spacer in the rear when using factory wheels with a lift kit installed. No wheel spacer is required when using aftermarket wheels with a positive offset. 74 SIGNATURE SERIES LIFT KIT The SUZUKI 500i & 750i KING QUAD require a 1” or greater wheel spacer in the rear when using factory wheels with a lift kit installed. No wheel spacer is required when using aftermarket wheels with a positive offset. 75 FOR INDEPENDENT REAR SUSPENSION MODELS ONLY!!!!!!!!! 76 NOTE: THIS LIFT WILL NOT WORK WITH STOCK (REAR) Y660 GRIZZLY AXLES!!!!! GORILLA AXLES ARE REQUIRED!!!! DO NOT SELL THIS LIFT KIT UNLESS THE CUSTOMER HAS UPGRADED THEIR Y660 GRIZZLY (REAR) AXLES TO GORILLA CV AXLES!!! 77 NOTE: DOES NOT WORK ON SPORT EDITION RHINO WITH NITROGEN SHOCKS. 78 SIGNATURE SERIES LIFT KIT 2” Estimated install time for experienced mechanic: 1.5hr 79 SIGNATURE SERIES 2” LIFT KIT Tire: 28” Estimated install time for experienced mechanic: 2hr 80 SIGNATURE SERIES 2” LIFT KIT Lift: 2” Tire: 28” Estimated install time for experienced mechanic: 2hr 81 RHINO 3” LIFT Estimated install time for experienced mechanic: 3hr NOTE: DOES NOT FIT SPORT EDITION OR ANY OTHER MODEL EQUIPPED WITH GAS SHOCKS!!!!! 82 SIGNATURE SERIES LIFT KIT Estimated install time for experienced mechanic: 2hr 83 SIGNATURE SERIES 3.5” LIFT KIT Lift: 3.5” Estimated install time for experienced mechanic: 2hr 84 (SEMI-GLOSS BLACK) SIGNATURE SERIES LIFT KIT IMPORTANT NOTE: ALTHOUGH A 32.5 TIRE WILL FIT ON THIS MACHINE WITH OUR LIFT KIT. THE GEARING ON THIS MACHINE IS HIGH AND OUR OPINION IS THAT A 32.5” TIRE IS TOO MUCH TIRE FOR THIS MACHINE TO TURN WITH FAC- TORY GEAR RATIOS. Lift Kit Gain: 4” Tire Size: Up to 32.5” with aftermarket wheels Install Time: 3hrs NOTE: DOES NOT WORK ON 2017 SPECIAL EDITION MODELS! 2017 Special Edi- tion Models use a Helper/Tender Spring in the rear that will prevent our spring spacer from working. Black Powder Coated Finish HIGH LIFTER ATV LIFT KITS continued QUAD LIFT KITS Increases ground clearance by 1”-2”. Easy to install. Shims the shock brackets to raise the suspension to achieve clearance. Zinc plated. Lift kit can accelerate U-joint and boot wear. PERFEX ARCTIC CAT: BEARCAT 500 AUTOMATIC, 00-01 1531212 49.50 B