ATV/UTV 2018

173 carriers & racks bumpers & winches accessories plows & implements frame & chassis utv accessories body handlebar & grips cables & levers fuel & intake engine clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust electrical & ignition dealer aids HANDLEBAR & GRIPS 2018 ATV / UTV CATALOG EXTENDED GRIP HEATERS • 12 Volt, 20 watt system • Easy installation • Just remove your grips • Wrap heating element around the handlebars and replace the grips • Includes 2 grip heater elements, 1 resistor and 1 hi-low-off switch HANDLEBAR GRIP HEATER KIT Hi-Off-Lo Switch KX121664 7.95 L 12V Resistor KX121665 7.95 L • Grip heater kit for Ski-Doo’s Formula and Tundra models • Includes heater elements, toggle switch, quick connectors and crimps • 12V, 7.5A and 15A SKI DOO GRIP HEATER KIT • These grip heaters work with all 12V systems • They have 3 wires for “Hi-Low- Off” functions • Great for extended handle bars 8” EXTENDED HANDLE BAR GRIPS • Universal fit for all 7/8” handlebars • Great for use with handle bar extender or bar ends • Use these extended grips when using the SPI extended grip heaters • Sold per pair UNIVERSAL “HI - LOW - OFF” SWITCH • 3 function switch • Includes “Low - Off - Hi” functions • Comes with insulated connectors 62-12041 33.95 L 62-08011 17.95 L 62-01014 5.95 L PASSENGER GRIP HEATER • Replaces Yamaha OEM #8CR- W247G-00 • Can also be used as universal grip heaters 622315 64.95 L KX12170 32.95 L REPLACEMENT PARTS 6212054 52.95 L ATV GRIP HEATER KIT 625831** 54.95 L HEATED GRIPS 121286 39.95 L • Universal heated grips with “Hi-Low-Off” toggle switch • Step by step installation instructions included • Universal grip heater with “Hi-Low-Off” toggle switch • 14.2V, 2.9A, 40 watt ** Note: check the throttle lever clearance before installing.You may have to trim away rubber to fit properly. STD MODEL 2 WAY SWITCH: ON-OFF • Hot Hands are now offered in 2 styles, STD with an ON/OFF switch and our deluxe model with a switch that offers an OFF-LOW-HIGH range • Quick installation on most machines in minutes • Heaters work off the same power as headlights • The new heating cartridge is 4-1/2” long to cover the entire handle grip • Units draw 28 watts and 2.4 amps on low range and 56 watts and 4.8 amps on high range • NOTE: The lighting coil in the engine must be 75 watts or more • Not recommended for use on Polaris machines with dual headlamps • Fits over the handlebar - Can be used on all machines having a 7/8” O. D. handlebar, including ATVs • May be fastened with sheet metal screws for easy removal • Polly Heaters are molded onto a metal tube and have a double-wound heating coil which makes it a high/ low heater with no external resistors • Current draw of 30 watts on the high setting and 20 watts on a low at 12 volts POLLY GRIP HEATERS POLLY HANDLEBAR HEATERS CARTRIDGE TYPE HEATERS PH100 34.95 G PH300 22.95 SET G DELUXE MODEL 3 WAY SWITCH: OFF-LOW-HIGH PH200 32.95 SET G POLLY HEATED GRIPS Open ends for attach- ments such as bar ends. PH125 34.95 G