ATV/UTV 2018

256 body accessories handlebar & grips cables & levers engine fuel & intake carriers & racks plows & implements frame & chassis utv accessories bumpers & winches electrical & ignition clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust dealer aids EXHAUST = Our new M-7 V.A.L.E.™ exhaust systems feature our exclusive Teflon coated, blunted, cast magnesium outlet and our exclusive X-Lite™ retaining ring. These exclusive Two Brother Racing features not only look great, but also significantly reduce the weight of the exhaust system. = The V.A.L.E.™ inlet design eliminates the use of springs and creates an adjustable mount that is rock solid when fixed in place. The system also features a precision mandrel bent, thinwall s-bend tube, and for a full system, a header pipe custom fit for each model. = The P4 PowerTip™ was developed to fill the gap between the P1 and P1-X sound reducing tips. The P4 is more restrictive than our P1-X but quieter than the P1, reducing sound output between 5-6 dB on most pipes. Power loss is minimal. Not recommended for use with a spark arrestor screen. = Like all of our other sound suppressors, the P4 is very easy to install - simply unbolt your existing M-7 endcap, drop in the P4 and reassemble. Note: The P4 is only intended for use with our M series outlets. = Our P1 PowerTip™ sound suppressor is a recommended accessory for our exhaust systems with M series endcaps. A straight-through sound diffuser, the TBR PowerTip™ quiets the pipe to about 3-4 dB with no significant reduction in horsepower. Not recommended for use with a spark arrestor screen. = Easy to install - simply unbolt your existing M series endcap, drop in the P1 and reassemble. Note: The P1 is only intended for use with our M series outlets. = The P1X PowerTip™ sound suppressor is a recommended accessory for our exhaust systems with M series endcaps. A straight-through sound diffuser, the TBR PowerTip™ quiets the pipe to about 7-8 dB with no significant reduction in horsepower. Not recommended for use with a spark arrestor screen. = Like all of our other sound suppressors, the P1X is very easy to install - simply unbolt your existing M-7 endcap, drop in the P1X and reassemble. Note: The P4 is only intended for use with our M series outlets. = U.S. Forestry Service approved Spark Arrestors are included with all aluminum M-7 V.A.L.E.™ off-road slip-on exhaust systems. These tips mute the exhaust tone slightly with absolutely no loss of horsepower. Additionally these tips prevent the introduction of foreign matter into the exhaust system. This spark arrestor DOES NOT fit, nor is it intended to be used with the C2, C4 or C5 mufflers. Two Brothers Racing M-7 ATV/UTV EXHAUST CANISTERS