ATV/UTV 2018

FUEL & INTAKE 479 carriers & racks bumpers & winches accessories plows & implements frame & chassis utv accessories body handlebar & grips cables & levers fuel & intake engine clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust electrical & ignition dealer aids 2018 ATV / UTV CATALOG IDLE CUT SCREW AWAY SIZE & STYLE COMPOSITION POSITION SIZE 1.5 2.0 2.5 3.0 3.5 30,32,34Spigot Brass (chrome plated) 32.18 D LH VM34/110 VM3411015 VM3411020 VM3411025 VM3411030 ----- 32 and 34 Flange Brass (chrome plated) 29.25 D RH VM32/65 ----- VM326520 VM326525 VM326530 ----- 36 Spigot Brass (chrome plated) 48.36 D RH VM36/39 ----- ----- VM363925 VM363930 ----- Brass (chrome plated) 48.36 L LH VM36/36 VM363615 VM363620 VM363625 VM363630 ----- 38 Spigot Brass (chrome plated) 42.10 L RH VM38/24 ----- VM382420 VM382425 VM382430 VM382435 Brass (chrome plated) 42.10 L LH VM38/52 ----- VM385220 VM385225 VM385230 ----- 40 and 44 Brass (chrome plated) 45.90 D LH VM44/23 ----- VM442320 VM442325 VM442330 VM442335 Spigot Aluminum 68.00 D LH VM40/02 VM400215 VM400220 VM400225 VM400230 ----- THROTTLE VALVES } } } } LH IDLE ADJUSTMENT BOTTOM VIEW To determine a left hand or right hand throttle valve you must look at it from the intake side (cutaway facing you) to see what side your idle adjustment is on. If it is on the left side, it is a LH throttle valve and if it is on the right side it is a RH throttle valve. RH CARBURETOR PARTS & ACCESSORIES LEVER CHOKE CONVERSION KIT Includes all parts necessary to conver t lever operated choke carbs to cable operation. Installation of this kit is quick and easy. CABLE OPERATED CHOKE CONVERSION KIT FOR 30MM - 44MM POWER JET KIT VMPJK 25.25 L Power Jet Kits are used in two-stroke engine applications to improve midrange throttle response and add additional fuel to wide open throttle running conditions, especially with snowmobile clutches. Kits may be installed easily on Mikuni TM and VM Series carburetors. VM3620 VM3471 FITS REPLACES REPLACES REPLACES REPLACES PART # CARBS ARCTIC CAT JOHN DEERE KAWASAKI SKI DOO VM28129 4.97 L 26-28mm ----- ----- 11009-3508 404-1179-00 VM3471 2.95 L 30-34mm 6505-030 M67815 11009-3509 404-1042-00 VM3620 0.95 L 36-44 6505-197 ----- 16019-028 404-1047-00 FLOAT BOWL SCREWS FLOATS NEEDLE JET SETTER “O” RING Replacement of this O-ring is necessary when servicing carbs with a needle jet setter. This is essential to maintain the accuracy of precisely metered fuel. Mikuni # BV32/04. MIKUNI “E” CLIPS VM20369 1.42 L All VM28-VM38 carbs BS32126 1.00 L All VM40-VM44 carbs BS32126 1.00 L All TMS38 carbs FLOAT BOWL GASKETS VM28129 VM3461 (Oval) 9.55 L 30-34mm spigot mount aluminum carbs. Comes notched to work with or without baffle plate. VM28164 (Round with tapered back) 16.17 L VM24236 ( Round with flat back) 11.71 L 36-44 Spigot mount aluminum carbs and some zinc body OEM carbs. CW20416 1.10 L 4mm x 16mm 26-28mm spigot mount aluminum carbs, 30-34mm small body aluminum carbs and many zinc body OEM carbs. Mikuni # C2=0416. CW20518 0.78 L 5mm x 18mm 30-44mm spigot mount aluminum carbs. Mikuni # C2=0518. VM3427 9.56 L 30-34mm VM3609 26.52 L 36-38mm VM4405 26.52 L 40-44mm VM2656 9.65 L 24-28mm MIXING CHAMBER TOP ONLY W/ GASKET genuine VMCK 15.80 L VMLCK 29.30 L genuine genuine BV3204 3.00 L NEEDLES AND SEATS • Ref: VM26/26 • Fits: Mikuni • 28mm spigot • 24 - 30mm flange • Sizes 1.5 • 10mm hex with 9mm threads 120143 12.95 L 120144 12.95 L • Ref: VM28/163 • Fits: Mikuni • 30 - 44mm spigot • 32 & 34mm flange • Sizes 1.5 • 9mm hex with 10mm threads