ATV & UTV 2020

body accessories handlebar & grips cables & levers engine fuel & intake carriers & racks plows & implements frame & chassis utv accessories bumpers & winches electrical & ignition clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust HANDLEBAR & GRIPS 208 UNIVERSAL OVERSIZE BAR ADAPTOR PM14257 45.00 The universal adapter allows oversize (1 1/8”) bars to be clamped to ATVs, motorcycles and snowmobiles.Also works on top of snowmobile pivot risers. UNIVERSAL BAR RISERS Universal 7/8” Bar Riser - 1” (25mm) PD15301 35.00 Universal 7/8” Bar Riser - 1.6” (40mm) PD15302 40.00 Need a little bump in bar height? We’ve got just what you need. Our Universal Bar Riser raises 7/8” bars either 1” (25mm) or 1.6” (40mm). The unique design of these risers allows them to work on virtually any ATV, motorcycle - offroad and street - or snowmobile with 7/8” bars. Risers come with both metric and standard longer mounting bolts. Note - check your cable slack before purchase to determine how high you can raise your bars. The PowerRiser 325 comes in a 2” rise and will work on most snowmobiles with no cable modification. Check your cable slack for use on ATVs. Note - One piece OE bar clamps will not work with the PowerRiser 325 - Replacement 7/8” bar clamps are required (PM15470) POWERRISER 325 2” Tall X 3.25” wide, 7/8” to 1 1/8” Bar PM15421 75.00 PowerRiser from PowerMadd. This one piece design offers superior strength at an unequaled price. The PowerRiser provides dual pivot points so you can position the riser front to back, while positioning your bars up and down for the perfect bar placement. The PowerRiser comes in two widths – 3.25” for snowmobiles as well as Can Am and Polaris ATVs, and 4.75” for ATVs and motorcycles. Both widths allow you to use standard 7/8” bars or oversize 1 1/8” bars. • This electrical thumb warmer will surely add to the enjoyment of snowmobiling and protect your thumb against freezing • 3 Position switch High-Low-Off • No screws or holes for installation • 4 watts of electricity • Heating element twice as long as other brands ELECTRIC THUMB WARMER NO MORE FROZEN THUMBS! KX121661 23.95 12v Resistor KX121665 7.95 Hi - Off - Lo Switch KX121664 4.95 REPLACEMENT PARTS • Universal • 12.6V, 12A, 35 watt • Includes 4 step switch, thumb warmer, and instruction sheet • Display packaged HAND GRIP HEATER SET 62-12057 99.95 EXTENDED GRIP HEATERS • These grip heaters work with all 12V systems • They have 3 wires for “Hi-Low- Off” functions • Great for extended handle bars 62-12041 52.95 PASSENGER GRIP HEATER • Replaces Yamaha OEM #8CR- W247G-00 • Can also be used as universal grip heaters 622315 64.95 POWERRISER 475 The PowerRiser 475 comes in two heights – 2” and 3”. Both are available for standard 7/8” bars and oversize 1 1/8” bars. 2” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15430 75.00 2” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15431 75.00 3” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15432 80.00 3” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15433 80.00 2.25” Tall X 4.75” wide, 1 1/8” to 1 1/8” Bar PM15440 85.00 POWERRISER 325 • The PowerRiser 325 is 3.25" wide and 2" tall and fits on most snowmobiles with no cable modification needed.For ATV installation please check the amount of slack in your cables before purchasing. This updated version has been modified to work with all original equipment bar clamps – even the one piece style bottom clamps. • If you are looking for more than a 2” riser check out the Pivot Adapter kit or Universal Pivot Riser. For ATVs with wider bar clamps, check out the PowerRiser 425. PM45419 75.00