CHEMICALS
1182
luggage
body
accessories
handlebars
& grips
mirrors
cables &
levers
electrical
lighting
engine
fuel &
intake
air & oil
filters
clutch
brakes
drive
steering &
suspension
bearings
tires
chemicals
tools &
shop
trailer
exhaust
J-B PERM-O-SEAL
RADIATOR STOP LEAK
DESCRIPTION
PART # MFG #
J-B Perm-O-Seal (Carded)
446004
DS-114
2.54
G
J-B PLASTICBONDER
BODY PANEL ADHESIVE, FILLER & SEALER
Strength 3770 PSI
Set Time 15 Minutes
Sand in 30 Minutes
Dries Tan
Great For:
• Filling Dents
• Bumpers
• Automotive Trim
• Composite Panels
• Interior & Exterior Plastic Parts
• Polypropylene & Polyethylene Plastics
• Fiberglass
Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs
and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic
Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes.With a tensile strength
of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.
DESCRIPTION
PART # MFG #
J-B PlasticBonder Syringe - 25 mL
446017
50133
7.94
G
HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be
exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard
bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at
high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined,
ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey
in color. It is able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF
DESCRIPTION
PART # MFG #
J-B HighHeat Epoxy Stik
446003
8297
9.96
G
J-B HIGHHEAT
TEMPERATURE RESISTANT EPOXY PUTTY
Strength 800 PSI at Room Temp. 600 PSI at 400ºF
Set Time 1 Hour
Functional Cure 8 Hours
Dries Machine Grey
Great For:
• Exhaust Manifolds
• Tail Pipes
• Mufflers
• Engine Blocks
• Duct Work
• Machinery
• High Temperature Projects
Great for:
• Permanent Repairs for All Car, Truck, Van, Bus and Tractor Radiators
• Will Not Clog or Harm Cooling System
J-B Weld Perm-O-Seal is a specially formulated non-toxic compound ground to a very fine
particle size to quickly mix and flow into all areas of the cooling system to find and seal leaks.The
powered concentrate allows for an economical repair as compared to liquid based alternatives that
use similar technology. The special compound will quickly seal leaks and will also act as a rust
inhibitor and lubricant to internal cooling system parts. It will not clog or harm your cooling system.
“World’s Finest Cold Weather Compound”
#1 Brand for consumers and
professionals on the market today.
SPECIALTY PRODUCTS
