CABLES & LEVERS
267
2016 STREET CATALOG
luggage
body
accessories
handlebars
& grips
mirrors
cables &
levers
electrical
lighting
engine
fuel &
intake
air & oil
filters
clutch
brakes
drive
steering &
suspension
bearings
tires
chemicals
tools &
shop
trailer
exhaust
CC TYPE CARB/TB FN YEAR
PART #
TRIUMPH
Daytona 675 / Dayona 675
0675 Sportbike
Stock 144 06 - 11
682061 164.99
E
Daytona 675R / Daytona 675R
0675 Sportbike
Stock 144 11 - 12
682061 164.99
E
YAMAHA
YZF R6
0600 Sportbike
Stock 140 03 - 05
682062 164.99
E
YZF R6
0600 Sportbike
Stock 144 06 - 07
682063 164.99
E
YZF R6
0600 Sportbike
Stock 144 08 - 14
682064 164.99
E
YZF R6S
0600 Sportbike
Stock 140 06 - 09
682062 164.99
E
YZF R1
1000 Sportbike
Stock 144 04 - 06
682065 164.99
E
YZF R1
1000 Sportbike
Stock 144 07 - 08
682066 164.99
E
YZF R1
1000 Sportbike
Stock 144 09 - 14
682067 164.99
E
FOOT NOTES (FN)
134
Closed Course Race application only. Stock XR1200 uses 1” handlebar.
Must use 7/8” handlebars.
No replacement RH switch that features RH t/s,start/stop & start button.
140
For use with stock throttle bodies/carburetors and Rev2 throttle assembly only. IMPORTANT - The Rev2 throttle does not have the starter and
kill switch wiring or switches that are built into your stock throttle assembly. Use of the Rev2 Throttle requires an after market kill switch and
starter button assembly (pn 11-0098) not included in kit. Rev2 Kits have cables specifically designed for fitment on specific models, but the
Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limita-
tions on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten
the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the
best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe opera-
tion. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could
result in great bodily injury or death.
141
For use with stock throttle bodies. Stock reel is 33.4 mm. IMPORTANT - The stock twist throttle assembly on this model incorporates an
on/off switch, mode switch, and starter button. The Motion Pro 11-0098 accessory switch only has an on/off switch and starter button, and
cannot be used to replace the original switching functions on the stock throttle assembly. In order to install the Rev2 kit and retain all the nec-
essary switching functions, owners of this model will need to install longer aftermarket handlebars (at least 50 mm longer than stock on the
right side) and use the stock throttle assembly mounted behind the Rev2 throttle housing. The stock twist throttle assembly can be modified
to remove the throttle reel holder portion and leave just the necessary switches. This modification makes it narrower and uses less space
on the handlebar. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific.
Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some
installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install
longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motor-
cycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a
qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
143
For use with stock throttle bodies. Rev2 throttle kit for BMW S1000RR
Vehicle production date range 09/08 - 03/12. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle
itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the
stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2
throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method
for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installa-
tion should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great
bodily injury or death.
144
Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some
situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may
be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market
handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that
the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and
carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
145
01-2765 Rev2 throttle kit features throttle cable set 01-1270 that is 3 inches longer than throttle cable 01-1269 included in Rev2 throttle kit
01-2764.
REV2 THROTTLE KITS continued
