FUEL & INTAKE
568
helmets &
eyewear
apparel &
gloves
luggage
boots
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
front
suspension
traction
mini sleds
chemicals
offroad
tools &
shop
trailer &
towing
This High Flow Intake Kit for the Ski-Doo XP increases the air intake surface area by 33% to reduce the
chance of the intake plugging in powder snow conditions. It is located higher than the stock intake and
within reach of the rider so that any snow that collects on it can be easily wiped away. This kit consist of
a molded plastic adapter that seals between the stock air box and the hood along with an intake grate
that utilizes our pre-filter material that repels snow and water while passing air right through. This kit is
a must for anyone riding powder snow conditions.
SP14198 27.95
A
SKI DOO PRE-FILTER FOR REV
The stock air intake of the REV is known for plugging when running in powder snow conditions.
Eliminate this plugging problem with the SLP powder snow pre-filter. This unique material repels
powder snow and water while passing air right through. A must for anyone riding in powder snow
conditions.
The REV’s stock air intake is restrictive and because of its placement it is prone to plugging with powder
snow and ice. This results in a significant loss in horsepower which makes the sled very inconsistent
when running in deep snow conditions.This Kit corrects these problems by providing more than double
the intake surface area for added air flow to the engine. Its placement as well as its design, which
utilizes a powder snow pre-filter that repels snow and water, reduces the tendency of powder snow
and ice plugging by shedding the snow rather than allowing it to build up.
SKI DOO HIGH FLOW INTAKE KIT
FOR SKI DOO REV EXCEPT RT CHASSIS MODELS
The REV is in desperate need of additional chassis ventilation to eliminate unwanted
underhood heat build up. This kit effectively forces cold air into the chassis via two FLow-
Rite
TM
Intake Kits located in the rear of the shock tower. It then evacuates the hot air out
of the chassis via an attractive brushed aluminum outlet grate. The outlet grate utilizes a
powder snow pre-filter to eliminate powder snow build up or ingestion. Hot Air Elimination
Kit includes, Air Outlet Grate and (2) Flow-Rite
TM
intake kits.
SKI DOO HOT AIR ELIMINATION KIT
FOR SKI DOO REV EXC. RT CHASSIS MODELS
Hot Air Elimination Kit
SP14120
75.95
B
Air Outlet Grate Only
SP14121
42.95
B
High Flow Intake Kit
SP14119 94.95
B
Intake Grate Only
SP14122 46.95
B
HIGH FLOW
TM
INTAKE
FOR SKIDOO XP (EXCEPT E-TEC)
SP14129 75.95 pr
B
SP14120
SP14121
HOT AIR ELIMINATION KIT FOR SKI-DOO XP
Left (Clutch) Side
SP32555
89.95
A
Right (Exhaust) Side
SP32556 109.95
A
SKI DOO POWDER VALVES
FOR SKI DOO XP800 (EXCEPT E-TEC)
SLP Hot Air Elimination Kits help reduce stagnant underhood hot air to maintain higher horsepower by
delivering additional cold air intake and hot air escape from the chassis. This kit includes one shock
tower air inlet vent, an upper side panel air vent, and one outlet vent. Each vent utilizes a powder snow
pre-filter that repels snow and water, yet allows air to pass right through.
These trick new flapper valves are installed in the top side of the air box on Ski-Doo XP 800 models
to provide additional air flow to the engine. They are activated by air box vacuum. When the stock
intake begins to plug in deep powder snow conditions, these valves open to deliver the necessary air
flow that the engine demands. This substantially improves consistency when running in deep powder
snow conditions. Sold per pair.
2008-13XP 800 Carb
SP14134 52.95
B
2011-13 XP 800 E-TEC
236383
52.95
B
