Winter 2018

TRACTION 1095 accessories luggage body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals offroad tools & shop trailer & towing 2018 WINTER CATALOG GRAND MASTER TM TRAIL STUD OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track.The Grand Master™ is available in stud lengths of 1.075 with standard nuts and the 1.325 and 1.450 with ALN2-4500 big nuts. 1.575 has the tall big nuts ALN2-7000 in the packages. Packaged in quantities of 12, 48, 84 and 504. Use this stud if you have a single ply track.This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single ply track.*2.52 pitch tracks must use the square aluminum large Digger® support plates. TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger™ support plates. SIZE 12 PCS 48 PCS 84 PCS 504 PCS 1.075" X 5/16” GMP1075-12 28.95 GMP1075-48 114.95 GMP1075-84 195.95 GMP1075-500 1070.95 1.325" X 5/16” GMP1325-12* 32.95 GMP1325-48* 129.95 GMP1325-84* 219.95 GMP1325-500* 1203.95 1.450” X 5/16” GMP1450-12* 32.95 GMP1450-48* 129.95 GMP1450-84* 219.95 GMP1450-500* 1203.95 1.575” X 5/16” GMP1575-12** 32.95 GMP1575-48** 129.95 GMP1575-84** 219.95 GMP1575-500** 1203.95 * Now being packaged with ALN2-4500 big nuts. ** Now being packaged with ALN2-7000 big nuts. GRAND MASTER PRO TM CROSS COUNTRY RACING STUD • Woody's Performance Profile Grand Master Pro™ for Cross Country Racers With Single Ply Tracks • Machine 60° carbide tip and shank • For Single Ply Track Only • Four lengths: 1.075", 1.325", 1.450" & 1.575" • Big Nuts included with 1.325", 1.450" & 1.575" • 48 piece packages SIZE 48 PCS 1.075” X 5/16” GMPP1075-48 126.95 1.325” X 5/16” GMPP1325-48 141.95 1.450” X 5/16” GMPP1450-48 141.95 1.575” X 5/16” GMPP1575-48 141.95 4 LENGTHS 1.075” 1.325” 1.450” 1.575” LARGER 1.200” HEAD FOR SINGLE PLY TRACK 60 0 CARBIDE TIP & SHANK SIZE 90 PCS 90 PC. PKG. COMPLETEWITH ROUND DIGGER SUPPORT PLATES AND BIG NUT “SHORT” 1.325" X 5/16” GMPK1325-90 299.95 Woody’s Snowmobile Studs and Runners Increase the Performance and Safety Level of Your Snowmobile. Taking off, steering, and stopping your snowmobile on hard pack or icy conditions is unpredictable when you don’t have the proper traction control. So, what’s going on? You don’t have enough studs or carbide in the runner. You don’t have a proper balance of studs and carbide for your snowmobile. Woody’s has been showing snowmobilers how to eliminate slipping & sliding for over 40 years. You want to enjoy the outdoors and have fun driving your snowmobile. Woody’s studs and carbide wear bars provide grip on the trail. ELIMINATOR STUD For competition only.The narrow profile of this 30˚ point stud is designed for speed runs and drag competition. The 7mm thread is offered in lengths of 1.000” and 1.200” with a 7/8” head. The 1/4”-28 thread is offered in lengths of .700” through 1.060” with a 3/4” head. Available in packages of 48 that include lock nuts. The 5/16” thread is offered in 1.325” length with a 1” head. This 5/16” stud was specifically designed for the ice lemans style cross country racing. Avail- able in a 48 piece pack with ALN2-4500 Big Nuts. LENGTH SIZE 48 PACK 0.700" 1/4-28 GEP7000 109.98 0.750" 1/4-28 GEP7500 109.98 0.875" 1/4-28 GEP8750 109.98 0.920" 1/4-28 GEP9200 109.98 1.060" 1/4-28 GEP1060 109.98 1.000" 7mm GEP1007 109.98 1.075" 7mm GEP1077 109.98 1.200" 7mm GEP1207 109.98 1.325" 5/16 GEP1325S 115.98