Winter 2018

TRACTION 1100 luggage accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals offroad tools & shop trailer & towing ANGLED DOUBLE DIGGER ALUMINUM SUPPORT PLATES ANGLED DIGGER ALUMINUM SUPPORT PLATES An awesome design taken one step further. The Double Digger® and the 7° angle support plate designs have proven so effective separately, imagine what they will do together. Weight reduction and acceleration assistance rolled into one product. Read the instructions before installing. Available in 5/16” quantities of 12 and 48. This unique 7° angled design support plates holds the stud off perpendicular from the track. Under load the stud moves to perpendicular enhancing the consistency of acceleration and aiding the stud to resist going past perpendicular in the other direction. A unique concept and it works. Read the instructions before installing. SIZE 12 PCS 48 PCS 5/16” ADA3775 20.95 ADA3775B 78.95 SIZE 24 PCS 96 PCS 144 PCS 7MM ANG3725 21.98 ANG3725B 86.98 ANG3725C 126.98 5/16” ANG3775 21.95 ANG3775B 86.95 ANG3775C 126.95 FAT MAX MOUNTAIN PADDLE • Titanium paddle for tall lug support. • Brake crusted surfaces and propel through deep snow. • Sizes: Two hole paddle is 2.5" wide available in either 2" and 2.25" tall. Three hole paddle is 3.5" wide available in either 2" and 2.25" tall. SIZE PCS PART # 3.5” x 2.25” 12 214100 164.95 2.5” x 2” 12 214101 478.95 2.5” x 2.25” 4 214102 164.95 2.5” x 2.25” 12 214103 478.95 COMBO DIGGER SUPPORT PLATE • Nut and support plate are attached • Speeds up the stud installation process • Use only for 5/16"studs 1.325" studs or longer • Two Ply Tracks only HOLE DIA. PCS PART # 5/16” 24 214097 36.95 5/16” 48 214098 71.95 5/16” 1000 214099 1449.95 SIZE QTY PART # 5/16” x 1.250” 100 pcs GRIP1250-100 181.95 5/16” x 1.250” 250 pcs GRIP1250-250 453.95 5/16” x 1.500” 100 pcs GRIP1500-100 181.95 5/16” x 1.500” 250 pcs GRIP1500-250 453.95 SIZE PCS PART # 3.5” x 2” 4 214104 225.95 3.5” x 2” 12 214105 655.95 3.5” x 2.25” 4 214106 225.95 3.5” x 2.25” 12 214107 655.95 • Woody's Gripper Carbide Stud for Groomer Tracks and Tires • The Gripper carbide stud will help you drive your groomer up and down icy hills, around icy corners and stop slipping on uneven trail terrain • Available in two sizes: 1¼" for Tractor Tires and 1½" for Groomer Tracks • Solid brazed carbide tip • 5/16” self- tapping high grade steel shank • One person installation - two tools: ratchet & 7/16" socket • Environmentally friendly - flat carbide tip: the weight of the groomer keeps the stud in contact with the hard-packed snow or ice. The Gripper doesn't dig into the trail, it Grips. • Budget friendly - reduces wear and tear on the side wall of your tires. Eliminates the need for heavy, hard-to-install, combersome chains. • Driver friendly - Tight trails, ravines, icy hill and corners. Saves time because you maintain your speed no matter what terrain you have to groom. GRIPPER TM FOR GROOMERS