Winter 2018

CONTROLS 487 accessories luggage body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction chemicals offroad tools & shop trailer & towing 2018 WINTER CATALOG mini sleds • Our pivot style riser family now includes a 7" block which allows riders to raise their bars to the exact height they prefer.  • Pivot riser blocks are designed to be used on stock “T” style steering posts or on flat top steering posts with the PowerMadd Pivot Adapter • If your sled has a “T” post you can easily raise your bars by replacing the stock pivot riser with a taller or shorter PowerMadd Pivot Riser • The pivot riser is tapped so that is works with your stock handlebar clamps and existing bolts, or the clamps and bolts provided with the matching PowerMadd Pivot Adapter 7 INCH PIVOT RISERS DESCRIPTION PART # POLARIS 7 in. Wide Pivot Riser Polaris PM45542 60.00 ARCTIC CAT/YAMAHA 7 in. Wide Pivot Riser Arctic Cat/Yamaha PM45543 60.00 SKI-DOO 7 in. Wide Pivot Riser Ski-Doo PM45544 60.00 7 in. Narrow Pivot Riser PM45577 60.00 2 INCH PROTAPER BAR RISER Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. This kit includes a 2" riser block and replacement bolts which will work with the one piece top clamp. 2" is as high as you can raise your bars without having to modify your cables. PM45490 40.00 • The PowerRiser 325 is 3.25" wide and 2" tall and fits on most snowmobiles with no cable modification needed. For ATV installation please check the amount of slack in your cables before purchasing.This updated version has been modified to work with all original equipment bar clamps – even the one piece style bottom clamps. PM45419 75.00 POWERRISER 325 Introducing the new PowerRiser from PowerMadd. This one piece design offers superior strength at an unequaled price. The PowerRiser provides dual pivot points so you can position the riser front to back, while positioning your bars up and down for the perfect bar placement.The PowerRiser comes in two widths – 3.25” for snowmobiles as well as Can Am and Polaris ATVs, and 4.75” for ATVs and motorcycles. Both widths allow you to use standard 7/8” bars or oversize 1 1/8” bars. The PowerRiser 325 comes in a 2” rise and will work on most snowmobiles with no cable modification. Check your cable slack for use on ATVs. Note - One piece OE bar clamps will not work with the PowerRiser 325 - Replacement 7/8” bar clamps are required (PM15470) POWERRISER 325 POWERRISER 475 The PowerRiser 475 comes in two heights – 2” and 3”. Both are available for standard 7/8” bars and oversize 1 1/8” bars. 2” Tall X 3.25” wide, 7/8” to 1 1/8” Bar PM15421 75.00 2” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15430 75.00 2” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15431 75.00 3” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15432 80.00 3” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15433 80.00 2.25” Tall X 4.75” wide, 1 1/8” to 1 1/8” Bar PM15440 85.00 • If you are looking for more than a 2” riser check out the Pivot Adapter kit or Universal Pivot Riser. For ATVs with wider bar clamps, check out the PowerRiser 425.