Winter 2018

CONTROLS 491 accessories luggage body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction chemicals offroad tools & shop trailer & towing 2018 WINTER CATALOG mini sleds STD MODEL 2 WAY SWITCH: ON-OFF • Hot Hands are now offered in 2 styles, STD with an ON/OFF switch and our deluxe model with a switch that offers an OFF-LOW-HIGH range • Quick installation on most machines in minutes • Heaters work off the same power as headlights • The new heating cartridge is 4-1/2” long to cover the entire handle grip • Units draw 28 watts and 2.4 amps on low range and 56 watts and 4.8 amps on high range • NOTE: The lighting coil in the engine must be 75 watts or more • Not recommended for use on Polaris machines with dual headlamps • Fits over the handlebar • May be fastened with sheet metal screws for easy removal • Unlike other heater grips, the Polly Heaters are molded onto a metal tube which is then fastened to the handlebar • Has a double-wound heating coil which makes it a high/low heater with no external resistors • Current draw of 30 watts on the high setting and 20 watts on a low at 12 volts • Can be used on all machines having a 7/8” O. D. handlebar, including ATVs POLLY GRIP HEATERS POLLY HANDLEBAR HEATERS CARTRIDGE TYPE HEATERS POLLY HEATED GRIPS Open ends for attachments such as bar ends. JB WELD Repairs, fills, and bonds just about any material. PH100 34.95 PH125 34.95 JB8265 6.95 PH300 22.95 SET DELUXE MODEL 3 WAY SWITCH: OFF-LOW-HIGH PH200 32.95 SET • 12 Volt, 20 watt system • Easy installation • Just remove your grips • Wrap heating element around the handlebars and replace the grips • Includes 2 grip heater elements, 1 resistor and 1 hi-low-off switch HANDLEBAR GRIP HEATER KIT Hi-Off-Lo Switch KX121664 4.95 12V Resistor KX121665 7.95 KX12170 39.95 REPLACEMENT PARTS • Grip heater kit for Ski-Doo’s Formula and Tundra models • Includes heater elements, toggle switch, quick connectors and crimps • 12V, 7.5A and 15A SKI DOO GRIP HEATER KIT 6212054 52.95 EXTENDED GRIP HEATERS • These grip heaters work with all 12V systems • They have 3 wires for “Hi-Low-Off” functions • Great for extended handle bars 62-12041 38.95 Heater Element Only 121300 27.95 REPLACEMENT PARTS