Winter 2018

FUEL & INTAKE 569 accessories luggage body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals offroad tools & shop trailer & towing 2018 WINTER CATALOG POWDER VALVES TM For Polaris IQ, IQ RMK, Rush and Pro Ride Chassis SP14132 600/700/800 HO IQ and IQ RMK 55.95 236132 Rush and Pro Ride 55.95 236157* Pre-Filter 37.95 These trick flapper valves are installed in the back of the air box on 2006-15 Polaris 600/700/800 HO IQ, IQ RMK, Rush and Pro-Ride models to provide additional airflow to the engine. They are activated by air box vacuum. When the stock intake begins to plug in deep powder snow conditions, these valves open to deliver the necessary airflow that the engine demands.This substantially improves consistency when running in deep powder snow conditions. Sold per pair. SP14132 236157 * Will only work with PART # SP14132 POWDER SNOW PRE-FILTER 2000-2005 Polaris Edge Chassis This intake filter eliminates powder and ice build-up on the OEM foam which restricts air flow. This special pre-filter material repels snow and water, yet maintains high airflow. Not for IQ Race or AXYS Chassis 236132 627096 39.95 SLP FLOW-RITE TM INTAKE KITS REQUIRED HOLE SIZE INSIDE DIAMETER OUTSIDE DIAMETER SP14194 2-3/8” 2” 2-11/16” 22.95 SP14189 3-1/8” 2-1/2” 3-5/8” 22.95 SP14197* 2-1/2” 2” 2-3/4” 22.95 Eliminate air intake restrictions by installing the Flow-Rite™ in the dash for more air box feed. The Flow- Rite™ is supplied with a powder snow pre-filter that repels snow and water, yet passes air right through. A must for modified sleds. Sold per each. Part # SP14189 and SP14194 are made using a rubber flange to attach the Flow-Rite™ to the surface that it is being installed in. This rubber flange conforms itself to a wide variety of contoured, shaped and textured surfaces for a universal mounting system. Part # SP14197 is designed for ease of installation on flat or nearly flat surfaces. It requires a 2 1/2" size hole saw, which is readily available from any hardware store. Installation is a snap: hole saw the hole, debur the edges, clean hole saw shavings and snap Flow-Rite™ into place. * Snap-in style Flow Rite™ (Part # SP14197) is recommended for use in the dash only. Use rubber flange style for other locations. POLARIS EDGE - 2” SKI DOO ZX - 2” YAMAHA SX & MM - 2” FLOW-RITE TM FOR SPEEDOMETER OR TACHOMETER HOLE This new 4” pre-filter was designed to replace the speedometer to allow more cold air flow into the intake tract for more air box feed. Made with a powder snow pre-filter that repels snow and water, yet passes air right through. Requires a 4-1/2” hole for installation. SP14258 44.95