Winter 2018

CLUTCH 634 luggage accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction chemicals offroad tools & shop trailer & towing mini sleds Bolt to bench or hold in a vise for solid holding of clutch for spider removal, to shim belt, to check sheave clearance or to service spider. • Fits Arctic Cat snowmobile clutches. • Contacts all webs for maximum support to eliminate clutch web damage • Center hold down for much greater holding stability while applying off center torque • Quick spin down thumb nut • Adjustable center post • Single person operation even on the most difficult spiders • Fits all Polaris snowmobile and ATV clutches. • Contacts all webs for maximum support to eliminate clutch web damage • Center hold down for much greater holding stability while applying off center torque • Quick spin down thumb nut • Adjustable center post • Single person operation even on the most difficult spiders CLUTCH HOLDING FIXTURE FOR ARCTIC CAT CLUTCHES SP20197 89.95 F8/M8/F1000 SP20162 89.95 Bolt to bench or hold in a vise for solid holding of clutch for spider removal, to shim belt, to check sheave clearance or to service spider. CLUTCH HOLDING FIXTURE FOR POLARIS CLUTCHES ARCTIC CAT/COMET/POLARIS CLUTCH HOLDER (30MM) ARCTIC CAT CLUTCH HOLDER (33MM) 725-180 53.11 725-181 53.11 Sno-Stuff has an Arctic Cat style primary clutch holder for Arctic Cat, Comet, and Polaris to their product line. This tool is used to hold the stationary clutch sheave while assembling or disassembling the clutch and may be bench mounted or clamped in a vise. A must-have item to go with our jam nut and spider tools. This model has a 30mm tapered shaft to be used on these clutches- Arctco 102C and 108C, Arctic Cat 9 tower and new 6 tower (ex. 800/900 twin), Comet 100C, 101C, 102C, 108C, and 108EXP, and Polaris P85 and P90.Arctic Cat #0644-058, 0744-035. The Sno-Stuff Arctic Cat primary clutch holder is used to hold the stationary clutch sheave while assembling or disassembling the clutch and may be bench mounted or clamped in a vise. A must-have item to go with our jam nut and spider tools. This model has a 33mm tapered shaft to be used on clutches from 2002 and later models with 800 or 900 twin engines and 2003 and later models with 600,700,800 or 1000 laydown twin engines. Arctic Cat 0644-380. SLP SPIDER BUTTON REMOVAL TOOL WITH BELT TO SHEAVE CLEARANCE GAUGE FOR POLARIS DRIVE CLUTCH SP20201 19.95 Remove spider buttons quickly and easily without damage with this tool from SLP. Simply slide tool onto button and lift to remove. This tool also has a precision gauge to measure belt to sheave clearance for both 1.438” and 1.460” belt widths. Improper belt to sheave clearance will cause poor performance. CLUTCH BUTTON TOOL 725-288 40.92