FRONT SUSPENSION accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals tools & shop trailer & towing 1158 www.autodist.com | 207-942-6769 WEARBARS & CARBIDE RUNNERS Many competitors use a design that is mounted very shallow in the host bar. Our carbide is deeper set into the host bar giving it more surface contact adhesion. This will make it less susceptible to side impact failure from rocks or gravel. • 7/16” carbon steel host bar with a flat top to prevent “bar roll” during aggressive cornering • Carbides are made of YG13 Tungsten that provides the ultimate tensile strength for extreme durability and hardens to reduce chipping and increase longevity • The 90° angle of the carbide into the pocket of our runners makes for very large cross sections compared to other designs • 1” carbide segments allow for flex in ski without compromising carbide adhesion • Engineered and test fitted to precisely fit your ski for easy install • Chamfered ends to reduce catching when backing up and unloading • Extended studs to allow for ski skins • All necessary fastening Nyloc nuts included • All carbides and wearbars are finished in black rust preventative • Some models may require drilling A - 04 - 0 - 4 - 475 DEGREE OF CARBIDE LENGTH OF CARBIDE WEARPADS & HARDWELD HOST BAR DIAMETER APPLICATION GROUP A = 75° 2-10” Available 0= HARDWELD ONLY 4= 7/16 SKI REFERENCE D = 60° 2 = 2 WEARPADS 5= 1/2 F = DUAL 60° 4= 4 WEARPADS 6= WEARPADS/HARDWELD *some host bar limit wearpad qty. WB - 000 - XXX • Features hardweld on contact area of host bar giving it more depth to increase longevity • Less damaging to concrete and asphalt surfaces A - 04 - 0 - 4 - XXX • Features 4” of 75° Tungsten Carbide • This carbide is less aggressive and has a longer wear period • Hardwelded in the front and back of the carbide for extended durability • Recommended for use with lightly studded tracks or no studs D - 06 - 6 - 4 - XXX • Features 6” of 60° Tungsten Carbide • Designed for improved handling and performance cornering • 1.5” carbide wear pads in front and back with hardweld in between • Recommended for riders with a studded track F - 06 - 0 - 4 - XXX • Features two 6” of 60° Tungsten Carbide • Providing the most extreme control, stability and handling • Dual carbide style creates a new groove in the trail eliminating darting • Hardwelded in front and back for extended durability
RkJQdWJsaXNoZXIy MzA4ODQ=