2016 Trailer Catalog

309

2016 TRAILER CATALOG

CHEMICALS

tires &

wheels

axles, hubs

& springs

tongue

accessories

hitches

electrical

brake

parts

trailer

hardware

locks &

pins

towing &

tie downs

tools

chemicals

TRAILER

J-B PERM-O-SEAL

RADIATOR STOP LEAK

DESCRIPTION

PART # MFG #

J-B Perm-O-Seal (Carded)

446004

DS-114

2.54

J-B PLASTICBONDER

BODY PANEL ADHESIVE, FILLER & SEALER

Strength 3770 PSI

Set Time 15 Minutes

Sand in 30 Minutes

Dries Tan

Great For:

• Filling Dents

• Bumpers

• Automotive Trim

• Composite Panels

• Interior & Exterior Plastic Parts

• Polypropylene & Polyethylene Plastics

• Fiberglass

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs

and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic

Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes.With a tensile strength

of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

DESCRIPTION

PART # MFG #

J-B PlasticBonder Syringe - 25 mL

446017

50133

7.94

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be

exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard

bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at

high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined,

ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey

in color. It is able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF

DESCRIPTION

PART # MFG #

J-B HighHeat Epoxy Stik

446003

8297

8.95

J-B HIGHHEAT

TEMPERATURE RESISTANT EPOXY PUTTY

Strength 800 PSI at Room Temp. 600 PSI at 400ºF

Set Time 1 Hour

Functional Cure 8 Hours

Dries Machine Grey

Great For:

• Exhaust Manifolds

• Tail Pipes

• Mufflers

• Engine Blocks

• Duct Work

• Machinery

• High Temperature Projects

Great for:

• Permanent Repairs for All Car, Truck, Van, Bus and Tractor Radiators

• Will Not Clog or Harm Cooling System

J-B Weld Perm-O-Seal is a specially formulated non-toxic compound ground to a very fine

particle size to quickly mix and flow into all areas of the cooling system to find and seal leaks.The

powered concentrate allows for an economical repair as compared to liquid based alternatives that

use similar technology. The special compound will quickly seal leaks and will also act as a rust

inhibitor and lubricant to internal cooling system parts. It will not clog or harm your cooling system.

“World’s Finest Cold Weather Compound”

#1 Brand for consumers and

professionals on the market today.

SPECIALTY PRODUCTS