CLUTCH
662
helmets &
eyewear
apparel &
gloves
luggage
boots
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
r
ear
suspension
front
suspension
traction
mini sleds
chemicals
offroad
tools &
shop
trailer &
towing
Polaris 7/16”
211255 9.40
E
Others 1/2”
202996 14.00
E
MOUNTING BOLT KIT, 30MM
6-1/2” length x 1/2” fine thread - fits
205004, 208303, 208306, 209000, 212600,
214000, 204003, 204004, 214005, 21406
& others.
207654 16.25
E
MOUNTING BOLT KIT,
YAMAHA
7” length x 1/2” MO
VEABLE FACE
(Includes Bushing)
fine thread - fits Yamaha
clutches
208794 13.40
E
94C MOUNTING BOLT
5-1/2” long x 1/2” fine thread
205591 7.90
E
108EXP SHALLOW BORES
1/2” x 7-1/4” fine thread
215784 28.95
E
108EXP POLARIS
DEEP BORE
7/16” x 6-1/4” fine thread
216018 32.80
E
108EXP SKI DOO
14MM x 160MM. 15MM thread
216083 36.70
B
COVER ASSEMBLY KIT
These two cover
plates are identi-
cal except that they
have 102C and 108C
stamped on them.
They feature pressed
in bushing for a lon-
ger life.
207120
fits 102C
57.00
E
215300
Fits 108 EXP
45.30
E
COVER BOLT KIT
Cover plate bushing for latest Comet clutches. Can be
used only in cover plates with black snap ring (spirelox)
visible from the outside.
Contains (6) cover plate retaining bolts (1-3/4”
length), lock washers for cover plate bolts.
Adapts 30mm 1:10 tapered bore clutches to most 25mm 1:10 tapered
crankshaft EXCEPT ones having threaded male extension on the end,
then use 209001.
MOUNTING BOLT
GUIDE WASHERS
FOR 102 & 108
CLUTCHES ONLY
108EXP
For use with 1/2” mounting bolts
used on 102C and 108C clutches
for all applications except Polaris.
202996 14.00
E
COVER PLATE
BUSHING
For use with 9/16” mounting holes
on 102C and 108C clutches for
Polaris applications only.
211255 9.40
E
25MM CONVERTER BUSHING
213875 18.10
B
for 108C (1-1/2 Post) 2/Pkg.
216350 18.10
B for 108 EXP
2/Pkg.
SPIDER SPACERS
For 108C/108 EXP • Hardened
Spacers used in model 100 series
clutches, Replaces original parts (2 required).
Helps raise engagement rate. 1 washer raises
engagement 100RPM. Use 1, 2, or 3 washers on
102C/108C/108EXP series clutches.
SPRING SHIM
BELT SPACER SHIMS
Belt spacer shims allow use
of 1-5/16" belt in 102C/108C clutches.
203150 10.90
E for 102C
2/Pkg.
213875 18.10
B for 108C (1-1/2" Post) 2/Pkg.
214393 11.10
E for 108C (1-5/8" Post) 2/Pkg.
207398 7.90
E
102C Belt
1/Pkg.
213876 11.10
B 108C (Early) (Belt) 2/Pkg.
203849 11.10
E
3/Pkg.
SPACER
To raise the Engagement by approximately 200 RPM, install 1 spacer #203849 above the
spring. A maximum of 3 spacers may be installed, raising the top engagement by approxi-
mately 600 RPM.
203849 11.10
E
204799 23.55
E
211286 30.45
E
207296 6.45
E
