138 / 1258
138
HANDLEBAR & GRIPS
body
accessories
handlebar
& grips
cables &
levers
electrical
& ignition
engine
fuel &
intake
clutch
brakes
drive
steering &
suspension
bearings
tires
tools &
shop
exhaust
UNIVERSAL OVERSIZE BAR
ADAPTOR
PM14257
44.95
G
The universal adapter allows oversize (1 1/8”) bars to be clamped to
ATVs, motorcycles and snowmobiles.Also works on top of snowmobile
pivot risers.
UNIVERSAL BAR
RISERS
Universal 7/8” Bar Riser - 1” (25mm)
PD15301 35.00
G
Universal 7/8” Bar Riser - 1.6” (40mm)
PD15302 40.00
G
Need a little bump in bar height? We’ve got just
what you need. Our Universal Bar Riser raises
7/8” bars either 1” (25mm) or 1.6” (40mm). The
unique design of these risers allows them to work on
virtually any ATV, motorcycle - offroad and street - or
snowmobile with 7/8” bars. Risers come with both metric
and standard longer mounting bolts. Note - check your cable
slack before purchase to determine how high you can raise your
bars.
The PowerRiser 325 comes in a 2” rise and will work on most snowmobiles
with no cable modification.
Check your cable slack for use on ATVs.
Note - One piece OE bar clamps will not work with the PowerRiser 325 -
Replacement 7/8” bar clamps are required (PM15470)
POWERRISER 325
POWERRISER 475
The PowerRiser 475 comes in two heights – 2” and 3”.
Both are available for standard 7/8” bars and oversize 1 1/8” bars.
2” Tall X 3.25” wide, 7/8” to 1 1/8” Bar
PM15421 69.95
G
2” Tall X 4.75” wide, 7/8” to 7/8” Bar
PM15430 69.95
G
2” Tall X 4.75” wide, 7/8” to 1 1/8” Bar
PM15431
69.95
G
3” Tall X 4.75” wide, 7/8” to 7/8” Bar
PM15432
74.95
G
3” Tall X 4.75” wide, 7/8” to 1 1/8” Bar
PM15433 74.95
G
2.25” Tall X 4.75” wide, 1 1/8” to 1 1/8” Bar
PM15440
79.95
G
Introducing the new PowerRiser from PowerMadd.This one piece design offers superior strength at
an unequaled price.The PowerRiser provides dual pivot points so you can position the riser front to
back, while positioning your bars up and down for the perfect bar placement.The PowerRiser comes
in two widths – 3.25” for snowmobiles as well as Can Am and Polaris ATVs, and 4.75” for ATVs and
motorcycles. Both widths allow you to use standard 7/8” bars or oversize 1 1/8” bars.