STEERING & SUSPENSION
1026
body
accessories
handlebar
& grips
cables &
levers
engine
fuel &
intake
carriers
& racks
plows &
implements
frame &
chassis
utv
accessories
bumpers &
winches
electrical
& ignition
clutch
brakes
drive
steering &
suspension
bearings
tires &
wheels
chemicals
tools &
shop
exhaust
HIGH LIFTER ATV LIFT KITS
GET UP TO 2 MORE INCHES OF GROUND CLEARANCE!
For every model, the lift kit is a simple bolt-on system that comes with all of the necessary brackets, bolts and complete instructions. The lift kit
design lowers the front A-arms. In addition to the increased ground clearance, the space between the fenders and tires is also increased. The
lift also allows larger tires to be installed by reducing tires rubbing fenders and mud flaps. As with any lift kit, C.V. joints will operate at a slightly
increased angle, which will increase maintenance requirements and wear.
4513000
4553000
4545000
DESCRIPTION
YEAR
PART #
ARCTIC CAT
550 H1, EFI & LE
09-14
4588503 TBA
650 H1
10-12
4588503 TBA
650 MUD PRO
10-11
4588503 TBA
700 H1
08-14
4588503 TBA
700 MUD PRO
08-14
4588503 TBA
1000 H2, S, GT, LTD
11-14
4588503 TBA
1000 MUD PRO H2
10-14
4588503 TBA
1000 THUNDER CAT H2
08-10
4588503 TBA
NOTES:
DOES NOT FIT TRV MODELS
1” SPACERS ARE REQUIRED ON THE REAR IF YOU RUN FACTORY WHEELS WITH A LIFT KIT INSTALLED.
SEE OPTIONAL AXLE SPACER PART# AXLEPACER-A-1
IF CUSTOMER IS HAVING PROBLEMS WITH FRONT AXLES POPPING OUT. SEE DESCRIPTION BELOW.
ARCTIC CAT 400/500/650/700/1000 06-14 FRONT AXLE SPACER KIT by B&J CUSTOM FAB- COMES WITH 2 SPACERS AND 2 NEW
CASTLE NUTS FOR THE AXLES
SPACER KIT IS DESIGNED TO HELP KEEP THE AXLE FROM PULLING OUT OF THE DIFFERENTIAL WITH A LIFT INSTALLED.
SPACER GOES BETWEEN TH HUB AND THE AXLE CUP, WHICH
GIVES THE THE AXLE A LITTLE SLACK SO THAT IT DOESN’T BOTTOM OUT AND PULL OUT OF THE DIFFERENTIAL. THE KIT ALSO
COMES WITH 2 NEW CASTLE/SLOTTED AXLE NUTS THE COTTER PIN CAN BE RETAINED ON THE FACTORY AXLE.
PROWLER 1000 XTZ
09-14
254033 299.95
B
300 2X4, 4X4
98-05
4513000 159.95
B
366
08-10
45136601 172.95
B
2X4, 4X4
96-99
4514550 104.95
B
454
96
4514550 104.95
B
500 4X4
98-99
4514550 104.95
B
400 FIS 2X4, 4X4
00-01
4515001 137.95
B
500 AUTO
00-01
4515001 137.95
B
500 MANUAL LATE
00-01
4515001 137.95
B
375 2X4, 4X4 2002-2003 SRA MAODELS ONLY
02-03
4515002 155.95
B
400 2X4, 4X4 2002-2003 SRA MAODELS ONLY
02-03
4515002 155.95
B
500 FIS MANUAL 2002-2003 SRA MAODELS ONLY
02-03
4515002 155.95
B
500 FIS AUTOMATIC 2002-2003 SRA MAODELS ONLY
02-03
4515002 155.95
B
400I
02-05
4515003 145.95
B
500I
02-04
4515003 145.95
B
DOES NOT FIT AC500I 2005 MODELS; SEE PART# ALK650-00 FOR 2006-2007 AC500I MODELS
500I 2X4 & 4X4
08-09
4515004 162.95
B
NOTES:
SEE OPTIONAL AXLE SPACER PART# AXLEPACER-A-1 IF CUSTOMER IS HAVING PROBLEMS WITH FRONT AXLES POPPING OUT. SEE
DESCRIPTION BELOW.
ARCTIC CAT 400/500/650/700/1000 06-13 FRONT AXLE SPACER KIT COMES WITH 2 SPACERS AND 2 NEW CASTLE NUTS FOR THE
AXLES. SPACER KIT IS DESIGNED TO HELP KEEP THE AXLE FROM PULLING OUT OF THE DIFFERENTIAL WITH A LIFT INSTALLED.
SPACER GOES BETWEEN TH HUB AND THE AXLE CUP, WHICH GIVES THE THE AXLE A LITTLE SLACK SO THAT IT DOESN’T BOTTOM
OUT AND PULL OUT OF THE DIFFERENTIAL. THE KIT ALSO COMES WITH 2 NEW CASTLE/SLOTTED AXLE NUTS THE COTTER PIN
CAN BE RETAINED ON THE FACTORY AXLE.
400I
06-07
4516500 122.95
B
500I
06-07
4516500 122.95
B
650 V-TWIN
04-06
4516500 122.95
B
650 TRV H1
05-06
4516500 122.95
B
650 H1 LE
05-07
4516500 122.95
B
700 EFI SE
06-07
4516500 122.95
B
